A Healthier Way to Mill

Burst grains, dried beans, and other legumes into fresh, nutritious flour. Instead of grinding, the Kitchen Mill™ uses a rotor and stator to burst wheat and legumes, keeping the nutritional value of the natural kernels intact.

Fast Operation

Produces up to 24 cups of natural, whole-grain flour in under 8 minutes.

Powerful Motor

The 1.8 horsepower, 1000-watt motor will not overheat and is permanently lubricated.

Advanced, Durable Design

The patented, stainless steel, Micronetic™ milling chamber never gums, jams, or glazes. (Please see FAQs for allowable ingredients for milling.)

Ideal for Special Diets

Make healthier, alternative flours, including gluten-free flour out of rice, quinoa, or soy in seconds.

  • 1.8 peak horsepower motor
  • 1000-watt motor
  • Dimensions: 10.25" wide x 8.5" tall x 9.25" deep
  • Weight: 7.6 lbs
  • 8-year warranty
Kitchen Mill is rated 3.9167 out of 5 by 12.
Rated 4 out of 5 by from My blendtec kitchen mill exploded I have had my current blendtec kitchen mill for just over three years. This was my third blendtec kitchen mill. I do not register my mills for warranty as I use them to grind small dry wood samples for analysis. My previous mills have jammed and the motors burned up. Something happened to my current mill while in use this morning and it literally lifted up off the cannister and landed upside down. I am fortunate to use the unit on a table considerably lower than counter height so the motor housing did not hit me in the head. I'm sure this was just a crazy fluke and will be promptly ordering a new unit, my fourth in 8 years. This unit grinds better and costs less than anything available in my industry. Like others have said about flour dust (wood dust for me), it blows out from between the motor and canister. I did not have this problem with my earlier mills but have with my last two. Either the gasket or the latches have changed as my last two units haven't locked down like the previous units. I recommend using it outdoors or indoor with an exhaust fan running. I also recommend wearing safety glasses, a dust mask and hearing protection as the unit is as loud as a jet engine and particles have a tendency to fly out when the hopper is almost empty. I would like to see the gasket/latch issue addressed and it would be great if there was an easy way to be able to unjam the milling chamber and clean in there. As you can see in the picture, my mills get heavy use. Like others, I use compressed air to blow out as much residue as possible.
Date published: 2014-09-11
Rated 3 out of 5 by from I am disappointed that the flour blows out while it is grinding. Makes a mess
Date published: 2014-06-28
Rated 1 out of 5 by from Service for mill The clips on the grinder are not up to par. They break easily and then you WAIT forever for the repair team to get to your unit! Maybe it's because it was under warranty and not worth their time!
Date published: 2014-08-04
Rated 2 out of 5 by from Works OK, but using it is a strugle I've had my mill since 2006. I just ordered the third gasket! The gaskets don't last, and the two unit halves don’t fit together well. I seems the gasket was an afterthought added to the prototype. Without a good seal between the motor unit and the bin, the mill shoots out flours at nearly supersonic speed! The foam “filter” placed at the motor exhaust port doesn’t do much to keep the product inside the unit either. I can’t use my mill indoors because if I do, I have to clean the entire room. The other reason I can’t use the mill indoors is it sounds like a jet plane ready for take off. If I had a decibel meter, I would let folks know how loud this thing really is. I literally take it to the garage, don the ear blocks, and grind the grain outside. Even on the coarsest setting (the dots on the “adjustment” panel provide no real notion of the fineness of the mill), the mill is very fine. With a stone grinder, you can produce everything from cracked grain to the finest XXX mill. I stored the unit in the garage for while and bugs invaded the works. The bin was clean, as was the bottom of the motor, but A LOT of material accumulates inside the mill that you can’t remove. Did I mention I clean this thing with compressed air (like at a gas station)? And even then, material is left behind. I know this because I had to crack it open to clean it after the bugfest. This machine will make a flour from wheat berries and other dry, non-oily grains. If you have a need for that task, this mill will work. Just don’t plan on doing it indoors without hearing protection, and budget for replacement parts. Finally, it’s clear that the new manufacturer, Blendtec, makes blenders and the mill appears to be a product afterthought. On this very review form, I’m asked to state “how I use my blender the most” and “how many blends do you currently have on my machine” which is puzzling given this is not a blender.
Date published: 2014-08-24
Rated 5 out of 5 by from I love it !!!!! i love my new kitchen mill i do not know whyh i waited so long to get one
Date published: 2014-05-10
Rated 3 out of 5 by from Well, I loved this when I first bought it. When I first bought this I loved it. It does everything it says it does. I have owned it for several years but used it here and there, not constantly. Last year it started blowing the flour into the sealed top of the mill and it was shooting out the vents on the sides. I called Blendtec and it was out of warrantee and seemed that it would cost a lot to fix it. I took it apart and saw that the sealant used to glue the motor to the plastic housing had come apart. I cleaned it well and did continue to use it with it blowing flour all over when in use. Now the housing for the motor has a crack in it. I guess I am disappointed that it was not more durable. I thought for sure I would only have to buy one grain mill in my life. Now I have to buy another one. I just wish it was more durable. I took good care of it, did not drop it, etc. and it still lost its seal and started malfunctioning.
Date published: 2015-01-20
Rated 5 out of 5 by from Great! I bought this couple months ago and I ♥ it!!! Everyone has it know in my family. Its really easy and It work excellent...
Date published: 2014-06-20
Rated 5 out of 5 by from nothing to complain about! My mom got me this for my birthday, and I was so excited! I have not purchased bread for weeks, now. It's been great to be able to mill my own wheat and bake my own super-delicious bread. It makes flour and stores upside down (perfectly compact for my teeny apartment!) And I think people who expect there not to be a slight flour mess with any wheat grinder would be crazy. So far it's done the job well. I have no complaints, and it's no louder than an air popper. Yay for wheat grinders!
Date published: 2015-02-25
  • 2015-05-03T06:40CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasreviews, tv_1, tr_11
  • loc_en_US, sid_52-601-BHM, PRD, sort_relevancy
  • clientName_blendtec

I see nothing on your website or in your manual that tells what each level of grinding represents.  How big is the largest, how small is the finest, what is each typically appropriate or recommended for, to match certain recipes, etc.  Please provide.  

Asked by: Acer
The largest setting on the Kitchen Mill will result in a consistency very similar to cornmeal. The smallest setting will result in a consistency as fine as pastry flour, very light. The mill does not crush or grind grains, it bursts it. The middle setting is most popularly used for virtually any recipe. There is no specific recommendation for any setting because it's just a matter of personal preference.
Answered by: Blendtec
Date published: 2015-04-30

I used it to grind 1 cup of wheat, and the motor smelled like burning.  My husband thinks new motor sometimes smells like that for the first few times, but I'm very concerned and afraid to use it again.  Does the burning smell eventually go away?  

Asked by: jnrcc
Yes, it is true there could be a slight burning smell the first few times you use the mill and that does usually go away quickly. As long as it is working well, it should be fine. If the smell does not begin to dissipate by the 10th cycle, please contact Customer Service at 1-800-253-6383 so we can help determine if something else is wrong with the machine.
Answered by: AdamBlendtec
Date published: 2015-04-29

Can I grind Flaxseed in the grainmill?

Asked by: littleflowerbug
The moisture content of flaxseed is too high, and will gum up the teeth of the Kitchen Mill. We do not recommend that you grind flaxseed in it.
Answered by: Blendtec
Date published: 2015-04-22

how to open it for first time???????????

Asked by: mcea
The clips on the side may need to be pulled so you can pull the machine out. If you need further assistance, please call Customer Support at 1-800-253-6383 and we should be able to walk you through the whole process in more detail.
Answered by: AdamBlendtec
Date published: 2015-03-24

Where is your mixer that has a touch screen? I saw it at the International convention. 

Asked by: Sals
The mixer that you saw is a concept/prototype that we have been developing. We are planning on mass producing this mixer, but do not yet have availability dates or pricing available. To stay in the loop for when it is available, you can sign up here to receive future announcements: http://www.blendtec.com/promotion.
Answered by: Blendtec
Date published: 2015-03-23

I was using the mill for the first time today and grinding wheat. It works fantastically, but there was quite a bit of the powdered flour being shot out the side vent. The flour was lovely but the mess was awful. Is this normal?

Asked by: Shanny
This might indicate an issue with the procedure or with the machine itself. Customer Service can help you determine exactly what is going on if you call 1-800-253-6383.
Answered by: AdamBlendtec
Date published: 2015-03-18

Can I will whole dried corn in the Blendtec?  If the hopper large enough to accept whole kerels?

Asked by: Fran Cole
Yes, you can mill corn in the Kitchen Mill.
Answered by: Blendtec
Date published: 2015-03-12

If the mill can send to Taiwan?

Asked by: Shalin0933
We do not ship outside of the US and Canada. We also do not have dealers in other countries who carry the Kitchen Mill.
Answered by: Blendtec
Date published: 2015-02-26
  • 2015-05-03T06:57CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_47
  • loc_en_US, sid_52-601-BHM, PRD, sort_recentAnswersFirst
  • clientName_blendtec