A Healthier Way to Mill

Burst grains, dried beans, and other legumes into fresh, nutritious flour. Instead of grinding, the Kitchen Mill™ uses a rotor and stator to burst wheat and legumes, keeping the nutritional value of the natural kernels intact.

Fast Operation

Produces up to 24 cups of natural, whole-grain flour in under 8 minutes.

Powerful Motor

The 1.8 horsepower, 1000-watt motor will not overheat and is permanently lubricated.

Advanced, Durable Design

The patented, stainless steel, Micronetic™ milling chamber never gums, jams, or glazes. (Please see FAQs for allowable ingredients for milling.)

Ideal for Special Diets

Make healthier, alternative flours, including gluten-free flour out of rice, quinoa, or soy in seconds.

  • 1.8 peak horsepower motor
  • 1000-watt motor
  • Dimensions: 10.25" wide x 8.5" tall x 9.25" deep
  • Weight: 7.6 lbs
  • 8-year warranty
Kitchen Mill is rated 3.9167 out of 5 by 12.
Rated 4 out of 5 by from Awesome machine I bought a stone grinder about 35 years ago. It was very large and hard to use and clean. This machine is great! Easy to use and small enough I can pull it out at any time and grind exactly what I need. It does spew out some flour while grinding but that is easily cleaned up. Thank you
Date published: 2014-07-02
Rated 5 out of 5 by from Durable! I bought my Kitchen Mill about 20 years ago and it has performed admirably and reliably ever since. I make all my own bread (in a machine) and everyone thinks it is so cool that I also mill my own flour. And it's so easy with The Kitchen Mill.
Date published: 2015-03-27
Rated 5 out of 5 by from Great Service I purchased the BlendTec Kitchen Mill Grinder for my son's wedding and had it at my home within a week! That is great turnaround time on an order!
Date published: 2014-06-19
  • 2015-05-29T07:11CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.3
  • cp_2, bvpage2n
  • co_hasreviews, tv_1, tr_11
  • loc_en_US, sid_52-601-BHM, PRD, sort_relevancy
  • clientName_blendtec

I was using the mill for the first time today and grinding wheat. It works fantastically, but there was quite a bit of the powdered flour being shot out the side vent. The flour was lovely but the mess was awful. Is this normal?

Asked by: Shanny
This might indicate an issue with the procedure or with the machine itself. Customer Service can help you determine exactly what is going on if you call 1-800-253-6383.
Answered by: AdamBlendtec
Date published: 2015-03-18

Can I will whole dried corn in the Blendtec?  If the hopper large enough to accept whole kerels?

Asked by: Fran Cole
Yes, you can mill corn in the Kitchen Mill.
Answered by: Blendtec
Date published: 2015-03-12

If the mill can send to Taiwan?

Asked by: Shalin0933
We do not ship outside of the US and Canada. We also do not have dealers in other countries who carry the Kitchen Mill.
Answered by: Blendtec
Date published: 2015-02-26

Will this mill grind teff? I have been told that teff is difficult to grind due to it's size (1/100 the size of wheat).  Also, I have heard issues with the oil content of the grain, but don't know whether the person is confusing it with something else.

Asked by: Georgie P
Yes, you can grind teff in the Kitchen Mill.
Answered by: Blendtec
Date published: 2015-02-11

can it mill raw dry tree nuts?  or must the nuts be roasted?

Asked by: 10BG
You cannot mill nuts of any kind in the Kitchen Mill. Nuts (roasted or not) have too high of a moisture content, and they will gum up the milling chamber. If you are looking to make nut flours, our blenders are great options for that.
Answered by: Blendtec
Date published: 2015-02-05

I've had my mill for almost ten years and I can see there is quite a bit of flour build up inside the machine. How can I get that out and will it damage the machine if I don't?

Asked by: Lynne
Flour buildup would indicate there is some issue with the machine which is allowing the buildup, and this can be removed by sending in the machine for a repair. There are many possible options for getting a working and healthy machine and Customer Service can help you determine what the best option is at 1-800-253-6383.
Answered by: AdamBlendtec
Date published: 2015-01-28

Can the blendtec kitchen mill grind sprouted and dried grains?

Asked by: Sabrina
Yes, as long as the grains are dried. You cannot put moisture of any amount in the mill, or it will damage it. If the sprouted grains are dried out they will work fine in the mill.
Answered by: Blendtec
Date published: 2015-01-26

Is this mill made in U S A

Asked by: Ronald
We engineer, design and assemble our kitchen mills in Orem, Utah, with components either manufactured in-house or sourced primarily from the US. There are some components of the mill that are made outside the US, or made with foreign components or materials. Due to some fairly strict requirements, those foreign components prohibit us from saying “made” or “manufactured” in the US without providing a lot of very specific detail.
Answered by: Blendtec
Date published: 2015-01-14

Can I buy the F shaped filter and rubber rings

Asked by: Betty22
Yes, they can be purchased on our website: http://www.blendtec.com/accessories/mill-gasket http://www.blendtec.com/accessories/f-filter
Answered by: Blendtec
Date published: 2015-01-09

What is the sound decibel level of this grain mill?

Asked by: Tallie
This depends on what is being ground, but it is typically between 80 to 90 decibels.
Answered by: Blendtec
Date published: 2015-01-08

Is the 120V appliance compatible to use in New Zealand where 220+ voltage is used (with a socket adapter) or will it require a step-down transformer to use? Thanks

Asked by: Aime
We do not recommend using our blenders in other countries, other than the one(s) they are made for. We have several dealers in New Zealand that you can reach out to and see what they currently have in stock: NEW ZEALAND Company Name: Southern Hospitality Contact Name: Paul Gell Address: PO Box 425 Dunedin Tel: +643 477 6969 Fax: +643 477 6383 Email: paul@southernhospitality.co.nz Company Name: Labyrinth International Ltd. Contact Name: Chris Innis Address: PO Box 9703 New Market Auckland Tel: + 649966485 Fax: + 029 227 4159 Email: chris@toasted.co.nz Company Name: Nature’s Nutrition LTD Contact Name: Debbie Buddle Address: 1/123 Vincent Street, Howick Auckland, NZ Tel: 64-953-72278 Email: Debbie@naturesnutrition.co.nz
Answered by: Blendtec
Date published: 2014-12-30

What s the warranty on the KitchenMill ?  Is it the same 8 year or more or less ?  Tx

Asked by: Ha79
The Kitchen Mill has a 3-year warranty.
Answered by: Blendtec
Date published: 2014-12-22

Can you make almond flour by grinding Almonds?

Asked by: Howling Wolfe
Because almonds contain some moisture, you cannot put them through the Kitchen Mill. If water or moisture of any kind gets in the Mill it will gum up the micronizing unit (stainless steel teeth), and the warranty will be void. Blendtec blenders are great for making all kinds of flours, including almond flour.
Answered by: Blendtec
Date published: 2015-02-05

如何清洗 ho too clean

Asked by: suyeye
One way is to use a paint brush to brush away the flour. You can also use a compressor and it will blow out the machine, just don't use a real high, powerful setting. Some of our customers may have other ways they can share of how they clean their Kitchen Mill.
Answered by: Blendtec
Date published: 2014-12-08

can I use the kitchen mill in India. 

Asked by: Kalsang
The Kitchen Mill is not available for use in India.
Answered by: Blendtec
Date published: 2014-12-08

I am very happy with the mill. The rubber ring has fallen apart. Do you carry spares? How do I order and cost of each Please.

Asked by: DANYc
The rubber ring, is the Mill Gasket on our site. You can buy new ones here: http://www.blendtec.com/accessories/mill-gasket
Answered by: Blendtec
Date published: 2014-12-01

I own this mill for over two years, it works great. We only mill wheat for flour.  I recently bought another unit for my mother and that unit does not mill wheat flour perfectly. Even with the fine settings, the milled flour is very coarse. suggestions?

Asked by: Ashish
Make sure the f-filter is pulled out about half way. Also try putting a wooden spoon (or something similar) through the cyclone cup opening, remove the cyclone cup first and make sure the mill is turned off. You should be able to see the spoon through the f-filter box. If you cannot, you will need to clean out the flour that is caked on there. The f-filter and cyclone cup regulate the air flow, which regulates the coarseness of the flour.
Answered by: Blendtec
Date published: 2014-11-21

What is the difference between the dots on the nob? 

Asked by: JRS064
The dots indicate different coarseness settings. However, it is very difficult to see the difference between one setting and another with the naked eye. An employee here uses her mill a lot, and she generally leaves hers on the middle setting.
Answered by: Blendtec
Date published: 2014-11-21

I have a k- tex Kitchen Mill, and I am needing the sponge part and is inserted on the outside to protect the engine from the flour when grinding.  Where can I get this?

Asked by: Nana
You can order it on our web site at blendtec.com It is in the accessory section. Or you can call customer service to place an order.
Answered by: mreed
Date published: 2014-11-17

We bought a K-tech Kitchen Mill model 91 about 20 years ago. The plastic casing of the unit has cracks in it now. Are there replacement parts for the white outside case? It looks just like the model pictured here.

Asked by: Reed
She can send it in for warranty repair. The cost would be $99. Or she can purchase a new mill at $179 which would come with a new 6-year warranty.
Answered by: mreed
Date published: 2014-11-08

What is the difference between Blendtec Model 52-601-BHM and the 52-601-FLP ?

Asked by: userbarry
They are the same. Different dealers that sale our product put their own number on the end.
Answered by: mreed
Date published: 2014-10-28

Can you grind date stones into powder with mill. Thanks.

Asked by: Akram
No. The pit or stone is too hard. It is designed for grains.
Answered by: mreed
Date published: 2014-10-27

Not sure what I am doing wrong, just bought a Kitchen Mill yesterday and the cup will not stay on;as soon as I turn on the machine the cup is blown off and into the bottom container. Is there a gasket supposed to be on the cup?

Asked by: jcsmith0131
It may be a good idea to call into customer service and make sure all is well with your machine. Blendtec 1-800-253-6383
Answered by: Sedwards
Date published: 2014-10-23

Are you going to address the problem with the dust coming out of the mill I would like to buy one but comments about flower dust coming out of the mill make me wonder if I should really buy this one

Asked by: Brahma
If the mill is used properly there will be very little dust coming from it. The seal on the container and the seal on the motor need to be free of the grain dust so that they seal well. The F-filter needs to be sitting out just a little so that the air can circulate. I know that I try to push it all the way in, thinking it will catch more, but the trick is to let is just protrude a little on the outside. This is an amazing mill. Worth a little dust.
Answered by: mreed
Date published: 2014-10-15

What is the warranty term for this item?

Asked by: Thuy
8 years.
Answered by: BlendtecJess
Date published: 2014-09-29

Can you use the blendtec to grind whole grains into flour? or do you have to buy the mill?

Asked by: Madje
You can grind whole grains into flours in our blenders.
Answered by: Blendtec
Date published: 2014-10-25

I've read about the importance of the temperature to maintain the nutritional value of the grain, however, none of the mills seems to list that variable. What is the average heat build up temperature for this mill?

Asked by: gardnho
The mill does not get hot enough to kill any of the nutrients. I will get warm and if it feels too hot just stop and give it a minute to rest and cool down, then start again.
Answered by: Blendtec
Date published: 2014-09-02

Can it be used to grind sugar in making powered sugar? And if the inside of the machine needs to be cleaned out, can you put water in it?

Asked by: Blue Eyes
The Kitchen Mill will only mill dry ingredients that are listed on the back of the user manual. If you need a copy of the user manual, e-mail residential@blendtec.com, and we can e-mail you a copy. No you cannot clean the mill with water. If you have put something through the mill and it is gummed/jammed up, you will have to return it for repair.
Answered by: Blendtec
Date published: 2014-08-27

Is there a lid for the bin? Remove the mill off the top and have a lid to cover the flour in the bin vs having to transfer it into another bin for a day or two?

Asked by: lockmup68
There is not a lid available for the Kitchen Mill, other than the one it comes with.
Answered by: Blendtec
Date published: 2014-08-27

I need to buy your Kitchen Mill, but I'm from Egypt and as you know here in Egypt all our appliances should be 220-240V, and I know your machine is 110-120V, so could you please give me a converter specification suitable to run this machine in 220-240V.

Asked by: Mostafa
Unfortunately, our Kitchen Mill is not available to ship internationally. We don't have a dealer who services them, so if you ever had any issues, you would not be able to get it repaired.
Answered by: Blendtec
Date published: 2014-08-27
  • 2015-05-29T07:00CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.3
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_52
  • loc_en_US, sid_52-601-BHM, PRD, sort_recentAnswersFirst
  • clientName_blendtec