The vented Gripper™ lid seals liquids in the jar during blending. But it does more than that—the removable vent allows steam to escape while blending soup or hot liquids. And an additional opening means you can add ingredients without even removing the lid.

The vented Gripper™ lid fits all WildSide+, WildSide, FourSide, Rebel, and XR jars; regardless of which blender model you own.

Vented Gripper Lid is rated 4.384615384615385 out of 5 by 13.
Rated 4 out of 5 by from Annoying I bought a blendtec a week ago to take to my vacation home. It is lighter than my VM blender, so easier to carry in luggage. I like every thing about it except the annoying vented lid. The liquid comes out of the vents and into the lid "well" no matter what speed. Good thing there is a well in the lid or it would be a real mess I use it mainly to grind chicken bones for my dog food for a disabled dog who must be on a special diet. It does a great job of pureeing the bones so my dog can eat them.
Date published: 2015-09-02
Rated 5 out of 5 by from Perfect! Perfect! No clue where my lid disappeared to but i'm glad I was able to buy one for a great price. Thank you for such a quality product!
Date published: 2014-09-24
Rated 5 out of 5 by from Fast service We needed a new lid as we accidentally dropped the old one in the blender when it was running
Date published: 2014-06-19
Rated 2 out of 5 by from Vase cover Was great for few weeks , now the clear part of the cover is loose and falls off every time
Date published: 2016-03-30
Rated 5 out of 5 by from Vented Gripper Lid - 64oz Jar Blendtec Stealth This lid is much better on the Blendtec Stealth. During blending action, the lid causes the food to circulate instead of over flowing out of the edges of blender. Blendtec should've included this lid with the purchase of the Stealth instead of making this an additional purchase.
Date published: 2014-06-19
Rated 5 out of 5 by from Excellent Part I bought one for a family member who didn't have the right one when he purchased the Blendtec out of the country and one for us, just in case, although not sure if we will need to replace the one we have as ours works like a charm after 6 maybe 7 years
Date published: 2014-08-30
Rated 5 out of 5 by from Great Replacement Bought this to replace one we lost during a visit to Montana, so glad it was inexpensive. What else can I say, it works like a charm and fits perfectly, shipping was very fast and also inexpensive. Thanks blendtec!!!
Date published: 2015-08-31
Rated 5 out of 5 by from Large Opening I love the large opening vs the little pin whole button one I had on the old one. This is easy to take out and add things while the blendtec is going so very easy to make homemade mayo.
Date published: 2015-12-01
  • 2016-10-22T06:14CST
  • bvseo_cps, prod_bvrr, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasreviews, tv_2, tr_11
  • loc_en_US, sid_SRV-783, PRD, sort_relevancy
  • clientName_blendtec

Will this kid fit the Smoothie 18 model?

Asked by: Blair8607
The Smoother 18 is a commercial motor base that any of our jars will fit on. Our Fourside and Wildside+ jars both use the vented gripper lid, so this lid will work for what you have.
Answered by: AdamBlendtec
Date published: 2016-09-15

Will the lid with vent fit a Model ES3?

Asked by: STAL
The vented gripper lid is the standard lid that fits onto our two primary jars, the Fourside and Wildside+. All of our jars are compatible with all of our motor bases so they will work on model ES3 or any other model.
Answered by: AdamBlendtec
Date published: 2016-08-09

Do you still have the full thick black rubber gripper lid?

Asked by: Mary Ann
That lid is only available commercially through our dealers. Here is a link that lists all of our local dealers around the country:
Answered by: AdamBlendtec
Date published: 2016-07-25

I would like to locate the older Blendtec lid that came with the older Blendtec EZ bar type blender that Sam Club use to carry. It is an all black think rubber lid with a thick grove. I CAN NOT FIND IT. Please help! I need a replacement. Thanks.

Asked by: Mary A
That lid is only available commercially through our dealers, Here is a link listing all of our dealers:
Answered by: AdamBlendtec
Date published: 2016-07-25

I own a Blendtec Model ES3 Total Blender ( Red ) I have lost my Jar and Lid, disappeared ,  I want to replace this  Jar and Lid, I went on line and saw that my ES3 is nowhere to be found on the Blendtec site, can someone help. I love these blender.

Asked by: dazs
ES3 is just the model of the blender base, so this is all our Classic models. We have several jars that will fit your base: I would also suggest you call customer service at 800-748-5400, and see if your blender is still under warranty and if you can get a replacement.
Answered by: Blendtec
Date published: 2016-07-14

Is this lid the more narrow lid for the Wildside+ or the original larger hole opening? I am looking for the new narrow on sold with the Pro 750

Asked by: LVBlender
The vented gripper lid shown here is the main lid we send with all residential Fourside and Wildside+ jars, and therefore this will be what you want for the Professional 750. We have had an older vented gripper lid with a smaller hole in the middle that we no longer make.
Answered by: AdamBlendtec
Date published: 2016-07-11

This lid closure and plastic insert look different than the one that comes with the Total Blender purchase on your site. Which is the newer version?

Asked by: tstarr
The vented gripper lid showing under Accessories is the same as the vented gripper lid showing on all of our jars and blenders on our site. The lid is viewed from different angles on the other listings so it may look slightly different, but it is the same This is the newest, most up to date lid we have now.
Answered by: AdamBlendtec
Date published: 2016-05-20

Will this lid work with model CTB 2 serial No. C570aA2301C-179890

Asked by: HenryR
Yes, the vented gripper lid is the main lid we have now and the same one that came with this blender.
Answered by: AdamBlendtec
Date published: 2016-05-03
  • 2016-10-22T06:21CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_28
  • loc_en_US, sid_SRV-783, PRD, sort_recentAnswersFirst
  • clientName_blendtec